Activity in Technology and Support
Resolved! Are packets that exceed the QoS class-default dropped?
QoS is configured on the IOS-XE SD-WAN Router currently in operation.I checked the QoS statistics with show policy-map and found the following.The bandwidth is 100 Mbps, and Queue 2 is allocated 34% bandwidth (31280 kbps).If more traffic flows to Que...
What SAML attribute does Firepower use as "username" in RADIUS AuthZ?
RAVPN connection profiles using Azure MFA for Authentication.We are using ISE for Authorization.When the FTD receives the SAML response from Azure MFA that includes multiple attributes in the claim, which attribute does FTD send to ISE as "username" ...
Connection closed by foreign host
Work on a Mac for my lab exercise, I have followed all the instructions for an SSH connection, including configuring line VTY 0 4I have read all the posts on here and nothing seems to fix the error" connection closed by foreign host".
Integrate AD in ISE and login to DNA Center with AD Account
Hello Community!Is there anyway that Active Directory should be integrated to ISE and AD User could login to DNA Center with the help of ISE?Because ISE is normally connected/integrated to DNAC and AD cannot be directly connected to DNAC. So how to l...
Wireless lan controller, configure isolated client using p2p blocking
@team HelloI have a project where we need to use the client isolate on SSID corporate, but there is a application that need communication between users pc´s. Is there an alternative for users to be isolated but in turn have communication with this ap...
Traffic from sub-interface subnets failing to AWS
I have an ASR1001-x with a single 10G interface to a switch on the LAN. I cannot pass traffic from the sub interface subnets to AWS network connected on WAN. The Lan interface subnet 192.168.50.0/23 passes traffic correctly. the other two do not. Can...
Resolved! Zombie Environment: "Terminate failed"
Hi,My most recent CML environment is in a zombie state and it can't be extended or ended. No new environments can be launched. How, if at all possible from my end, can i clear it?
To receive configuration change notifications from the WLC
I am currently facing challenges with configuring \ our Cisco Wireless LAN Controller (WLC). Our goal is to receive configuration change notifications from the WLC for monitoring and management purposes via an email. How can we achieve this?
Ping runs on switch directly but not from a device connected to switch
Hello Cisco community, i've got a weird problem. I have a server "A" connected to Gig2/0/18 as an access port (VLAN28) to my Catalyst C9300 switch. I can ping the device from the switch. The switch has an SVI configured for this vlan 28.I also have m...
CSCvx56223 - Cisco C9120 AP stops allowing new associations on SSIDs
Hello CISCO Community, I am experiencing a rather odd situation with our wireless environment. We have recently upgraded our wireless controllers, CISCO Catalyst 9800-40, to the 17.9.5. After this upgrade we started experiencing loss of associations ...
The issues of data and voice vlan being the same.
The user computer switches to voice vlan but the port configuration has both access vlan and voice vlan.Avaya ip phone switches to voice vlan.The user computer also switches to voice vlan.What could be the cause of this problem?Port configuration swi...
Max client count for Cisco 9120 and 9130 AP
What is the max client count that is recommended for cisco 9120 and 9130 AP operating on wifi 6 with which I can except a decent performance.Could someone please help me with this query?
Reconnect new iPhone to 150AX APs
I have existing AP which I configured with my old phone. Does anyone know how to reconnect with my new phone without factory resetting the APs?
Transport Gateway error
I running into an issue with Catalyst SD-WAN went trying to push a simple template to a devices. I keep getting the following error no matter what I adjust in the system template: [7-May-2024 21:50:51 UTC] Configuring device with feature template: c8...
Outbound dialer - Agent Reserved timer for Preview calls
Hi Guys,We have outbound dialer with Preview mode.System is able to reserve an agent and agent can either accept or reject the call (10 mins of preview time by default). But sometimes agents are taking longer time to choose their action and remain in...
| User | Helpful Count |
|---|---|
| 142 | |
| 120 | |
| 95 | |
| 90 | |
| 65 |
