Activity in Technology and Support
devnetsandbox.cisco.com unexpectedly closed the connection.
Cannot access Devnet -Sandbox CML. Tried to access on multiple browsers Edge/Chorme/Firefox
Resolved! Rebuild Cisco ACI with a new version
Hi, we have a Cisco ACI in our LAB enviroment with an older version 2.2. We'd like reset/clean all the fabric (n.3 APIC,n.2 Leaf and n.2 Spine) and restart with a new version, the 5.2. Our hardware support it We don't need the backup of actual config...
HOW TO Allow HTTPS through ASAv
Hi, i have topology and i want connect to google.com via browser (Https) . Although i can ping ICMP to google.com but my browser (Win7 VMware virtural machine) can't access. please help me ! ASA Version 9.9(2)!terminal width 511hostname ASA1domain-na...
Resolved! Archive file name
Hi, I have a "C1000-16FP-2G-L (15.2(7)E9)" device, I have enabled automatic config archive creation, but it gives the wrong time when naming. For example: While the time of my device is "10:15:19.801 +3 Thu Feb 8 2024", the name written in the archiv...
P60 Camera Control not working with codec plus
We have one webex codec plus and 3 Precistion 60 cameras. HDMI of each camera are connected to crestron switch and output of that that connected to Input of codec plus. switch of cameras are working fine but we are not able to control camera from cis...
Help with callhome on nexus 3132q-v, NXOS 9.3(12)
If someone please help me to get callhome done. Thanks!"callhome test" doesn't work:3132q-v(config-callhome)# callhome testtrying to send test callhome messagewarning:no callhome message sentThe following are all I typed and errors within config-call...
OSPF Routing between Meraki and Nexus switches
We're having an issue with OSPF routing done on a Nexus9000 that we are not able to figure out. To explain the situation fully, I'm going to provide quite a bit of information, I apologize in advance. Our organization currently has several branches, ...
SD-WAN AAR Strict option
Hi, I have a question about how the AAR SLA Class strict option works (vManage version 20.9, IOS-XE cEdges). Imagine a router with 2 colors: mpls and public-internetBy using an SLA class, you want to force FTP traffic over the public-internet color.W...
Resolved! DHCP failed, APIPA is being used error
Hello,I'm working on a lab assignment in packet tracer and when go into any of my devices and switch from static to DHCP it shows a message stating "DHCP failed. APIPA is being used."I have no idea what this means and I'm not getting any feedback fro...
Resolved! Send community both
Hello Folks,I have some doubts in BGP Basics, Please clarify it.In IOS XR Is the command send-community-ebgp is the replacement for send-community both,and for send-extended-community-ebgp for send community extended?I also have another doubt in IOS ...
How to expend existing disk space of cisco vFMC
Hello all, I would like to get some help how to How to expend existing disk space of cisco vFMC. For example, i have 2500 GB disk at existing fmc, then i want to get increase 300 GB. I did increase at vm level to 300 GB, and i check "df -h" command i...
Resolved! FMC Deployment got stuck at 5% for almost 3 hours
Hi is there a safest way to remove this deployment on my FMC that got stuck for almost 3 hours already? i hope there is a safest way to do it without breaking any database or any network interruption since the FTD is being used by the whole company. ...
%SW_MATM-4-MACFLAP_NOTIF On Switch WS-C3850-24XS Staging
Hello Good NightSorry i have a problem for my network, for you information my topologi network isSwitch Core (WS-C3850-24XS Staging) Switch Access 1 WS-C2960X-48TD-L Switch Access 2 WS-C2960X-48TD-LSwitch Access 3 WS-C2960X-48TD-LSwitch Access 4 WS-C...
Access to firmware for Cisco AP for 'non company' individual
Hi, apologies in advance if this is completely the wrong place for my question, but haven't had much luck on the main Cisco website, customer support pages.I have 2 wireless access points I'd like to reconfigure. They are both in lightweight mode and...
C1300 port-channel native VLAN mismatch w/NX9k
I am stumped.I have a native vlan mismatch on a trunked port channel between a C1300 and 2 nexus 9336c-fx2. Now I do have this configured as a vpc on the nexus side just fyihere are the details:C1300g17,18channel-group 1 mode autosw mode trunksw trun...
| User | Helpful Count |
|---|---|
| 147 | |
| 130 | |
| 113 | |
| 101 | |
| 71 |
