Discussions de Réseaux Sans-fil

Hi community,Few months ago I bought 3 POE AP CBW150AX for my house. And I have issues with two of them.I plugged two on my SG300 and everything seem goes well at this time.But one day, the switch port where one of the AP was plugged shut off. No mor...

Bonjour a toutes et tous,je voudrais savoir comment se connecter via un PC sur l'interface d'administration d'un point d'accès CBX150AX.Merci d'avance pour vos reponsesJJ

Bonjour,j'ai un WLC aironet 1815i et j'aurai besoin de modifier la politique des mot de passe généré pour les utilisateur de wifi GUEST pour les rendre plus simple. est ce possible ?  

Bonjour, Mon entreprise dispose d'un réseau wifi historique qui commence à montrer ses limites, nous souhaiterions actualiser celui-ci. Il est constitué d'un contrôleur cisco 5508, et d'une centaines de bornes AP702, AP1602, AP2602. Serait il possibl...

Hello everyone !I have got quite a problem with my WLAN configuration on my 860 series cisco.It says that it has a flash:c860vaew-advsecurityk9-mz.SPA.155-2.T1.bin so this IOS should not be a problem.But when i go online and try to find a solution it...

Hey there, I'm curious if the WLC9800 supports more than 8000 APs or if there's another solution available. Can you provide some insight on this? Thanks!

Hi, We have concerns about the use of an SSID dedicated to production, on which are Raspberry pi connected in 2. 4GHz.Users use Raspberry pi to connect to remote desktops, and the slightest disconnection cuts off the session, which sometimes happens ...

Je cherche le mot de pass par defaut des bornes wifi cisco 1852I

Hello,I have two Cisco WLC 9800 in HA. I want to change the management IP and I'am looking for documentation or information on this operation.The mangement IP is used for the AP, so I know I will have to change option 43 in DHCP. Changing management ...

Hi ! I'm having a strange issue with a 5508 WLC : the http/https access doesn't respond on the management interface but the ping is ok. I can access the WLC on its service port in http/https. SSH is ok on the service port and on the mangement interfa...

i have an AIR-AP2802I-E-K9 in autonomous mode and i can't configure it when i connect into the web interface i see 0 acces point when i go in the access point with putty i cant go in the CLI im block in "Cisco Controller" i just want to Configure my ...